Project Info
|
| Project # |
IFB 202581731 |
|
Project Name
|
DEN - Runway 7-25 Pavement Rehab
|
|
Location
|
Denver International Airport
|
|
Address
|
Map It
8500 Pena Blvd
|
|
City
|
Denver
|
|
State
|
CO
|
|
Zip
|
80249
|
|
Bid Date
|
November 21, 2025
|
|
Bid Time
|
5:00 PM
|
|
|
| Scope |
This project would be performed as a continuation of the DEN Pavement Management Program (PMP). The primary reason for this project is to improve the pavement condition of the Runway 7-25 complex as a means of sustaining the City’s current investment at DEN, fulfilling our FAA grant assurance obligations, and maintaining our Part 139 certification. Additionally, the City has been systematically updating portions of DEN’s airfield electrical and lighting systems from incandescent to LED as strategic opportunities and budget allow. This project would provide the operational closure window needed to complete that conversion for the Runway 7-25 complex, to replace aging and worn electrical infrastructure (as needed), and to remove and replace the worn surface painted pavement markings for the entire complex.
Supplier Required:
- Concrete Sand & Stone
- Cement
- Fly-Ash
- Pavement Accessories
- Geotextile Fabric
Subcontractors Required:
- Quality Control
- Survey
- Traffic Control
- Erosion Control
- Demolition Sawcutting
- Demolition
- Concrete Crushing
- Asphalt & ATPB
- Saw / Seal
- Asphalt Sealcoating
- Concrete Spall Repairs
- Runway Grooving
- Pavement Markings
- Airfield Electrical
- Hourly Trucking
- Bulk Powder Hauling
|
| Plans |
Plans have been uploaded to the Planroom.
Addendums and other communication will be sent via Notices and uploaded to the Planroom.
|
| Other Info |
GC bid date is 11/25/2025 @ 2pm, MW REQUESTS ALL QUOTES BE SUBMITTED BY 11/21/2025 BY COB.
This project is located inside the Perimeter Fence of the airport requiring increased Insurance and Badging requirements. Additionally, this is a Prevailing Wage project and requires certified payrolls. ROCIP V will be utilized on this project and all subcontractors should be familiar with this requirement.
This project is expected to start in late March 2026 with a duration of ~123 days.
All subcontractors should assume they will be required to be badged.
Questions are to be submitted through BidNet. Millstone Weber highly encourages subcontractors and supplier to ask their own questions on BidNet. The Q&A Deadline is 11/13/2025 2:00 PM, if you have questions that you want Millstone Weber to submit please have them sent to us by no later than 11/12/2025 @ 2:00 PM.
|
|
